The PEM1000 series of PoE modules are designed to extract power from Cat5 and better Ethernet cable, conforming to the IEEE 802.3af Power over Ethernet (PoE) standard. The PEM1000 is a low cost solution bringing maximum value in higher volume market segments like the IP network camera and VoIP phone segments. PEM1000 requires minimal external components, and provides 1500Vdc isolation between input and output.
The PEM1200 series of PoE modules are designed to extract power from Cat5 and better Ethernet cable, conforming to the IEEE 802.3af Power over Ethernet (PoE) standard. The PEM1200 is a full featured yet cost effective solution useful in general purpose segments including the IP network camera, VoIP phone, Access control, RFID, Wireless access points, and office/building automation segments. PEM1200 requires minimal external components, is architected for EMC compliance as per EN61000-4-2/3/4/5/6, and provides 1500Vdc isolation between input and output.
PEB4000 is a complete and plug and play High PoE solution, offering up to 30 watts of output power and an ideal solution for high power equipment manufacturers and system integrators of Pan-Tilt-Zoom (PTZ) video surveillance cameras, 802.11n and Bluetooth® access points, internet time clocks, WiMax®, RFID, thin client, Point of Sale, advertising display, industrial sensors, and single board computer, systems.
It has full functional compliance with the IEEE 802.3af (GPC0 model) or the two finger Layer 1 classification of the draft IEEE 803.2at, Power over Ethernet (PoE) standard. It is designed to extract power from CAT5 and better Ethernet cable when sourced by a IEEE 802.3af or draft IEEE 802.3at compliant Power Sourcing Equipment (PSE). The PEB4000 offers high efficiency from 5W to 30W, and is ideal for use across the load band. The PEB4000 requires no external components, and is tested for EMI compliance to FCC Class B Part 15 and EMI/EMC as per CE mark. It also offers 1500Vdc isolation between input and output.
UNDER DEVELOPMENT. The PEM30 is high power PoE module, designed to extract power up to 30W from a conventional Ethernet cable to provide a highly cost effective and easy solution to power Ethernet devices up to 30 watts at 12V or 5V with very few external components.
